Add one address.
Then check the tools.
SizeRef Size Charts is a remote MCP server. Your client needs its address and nothing else: no account, no sign-in, no key. This page shows the steps for Claude, Cursor and MCP Inspector, then what to do when a call is refused.
One address.
No sign-in.
Every client uses the same address. It speaks Streamable HTTP and is free during the pilot.
https://mcp.sizeref.online/mcp
The address ends in /mcp. Without it, https://mcp.sizeref.online/ shows a short web page about the server, not the server itself.
Once connected, your client should list three tools and one resource:
audit_size_chartAudit a size chart. Reports what is wrong or still open, without changing the chart.
normalise_size_chartNormalize a size chart. Turns a table into SizeRef chart format v1 from what it states and the answers you pass.
export_agent_ready_chartExport a size chart as SizeRef JSON, schema.org JSON-LD, CSV and plain text.
Resource: sizeref://schema/chart-v1, the JSON Schema for chart format v1. The same schema is a plain web address too: https://mcp.sizeref.online/schema/chart-v1.json. The server marks all three tools as read-only. The Tools page covers their inputs and answers.
This server takes size charts, never a person's measurements, and keeps none of the charts you send. Send chart data you are entitled to use. Do not send body measurements, customer records or other personal data.
It is for use in the US and India, and not in the EU, EEA or UK. Read the terms and the privacy policy before you connect.
Claude.
A custom connector.
Add the server as a custom connector. SizeRef tested this on 15 November 2026. Claude's help page says custom connectors work in Claude on the web and in Claude Desktop, and that the Free plan allows one custom connector. Menu names can change, so check Claude's help on custom connectors if yours differ.
Free, Pro or Max plan
- Open the connectors list.Go to Customize → Connectors. Click + Add, then Add custom connector.
- Enter a name and the address.Name it SizeRef Size Charts. Enter the URL
https://mcp.sizeref.online/mcp, then click Continue. - Review the detected settings.Claude shows the authentication settings it found. Click Continue.
- Choose No sign in.Under Authentication, choose No sign in. Leave Request headers empty. Click Add.
- Switch it on in a chat.In a chat, click + at the lower left, select Connectors, and switch SizeRef Size Charts on.
Team or Enterprise plan
An Owner or Primary Owner adds it once for the organization:
- Go to Organization settings → Connectors. Click Add, hover over Custom, and select Web.
- Enter the name and the URL
https://mcp.sizeref.online/mcp, then click Continue. - Review the authentication settings and click Continue. Under Authentication, choose No sign in, then click Add.
Members then go to Customize → Connectors, find SizeRef Size Charts (usually labeled Custom), and click Connect.
Check the three tools
With the connector switched on, ask Claude which SizeRef Size Charts tools it can use. It should name audit_size_chart, normalise_size_chart and export_agent_ready_chart. Claude's help page says you can turn single tools off in the Search and tools menu; keep all three on.
Then try a fictional chart. Paste it and ask in plain words:
Audit this size chart. Size,Chest,Length S,20,27 M,21,28 L,22,29
The Walkthrough takes a chart from audit to export.
Cursor.
One entry in mcp.json.
Add the server to .cursor/mcp.json in a project, or to ~/.cursor/mcp.json in your home folder for every project. A server with a url is a remote server. Cursor supports Streamable HTTP for those.
{
"mcpServers": {
"sizeref-size-charts": {
"url": "https://mcp.sizeref.online/mcp"
}
}
}No headers entry is needed: the server takes no key. If the file already has other servers, add the sizeref-size-charts entry inside the same mcpServers object.
Check the three tools
Cursor lists the server among its MCP servers, and its tools under Available Tools. In Cursor's current docs, servers sit under Customize in the sidebar, each with a toggle; make sure this one is on. Cursor uses the tools when they are relevant, or you can ask for one by name, for example "Use audit_size_chart on this table." See Cursor's MCP docs if the menus differ.
MCP Inspector.
Test from a terminal.
MCP Inspector is the reference tool for testing MCP servers. It runs through npx, so there is nothing to install by hand. It needs a recent Node.js release; the Inspector docs list the supported versions. The commands below pin version 2.13.0, the version SizeRef uses for its own checks.
List the tools
npx @modelcontextprotocol/[email protected] --cli https://mcp.sizeref.online/mcp --transport http --method tools/list
--transport http selects Streamable HTTP. The list should hold the three tools. Here are their names and titles as the server reports them:
audit_size_chart Audit a size chart normalise_size_chart Normalise a size chart export_agent_ready_chart Export a size chart … descriptions and input schemas left out
Call one tool
Pass the tool's name and its input. --tool-arg takes key=value and reads the value as JSON, so the table goes in as one object. The chart is fictional.
npx @modelcontextprotocol/[email protected] --cli https://mcp.sizeref.online/mcp --transport http --method tools/call --tool-name audit_size_chart --tool-arg 'table={"csv":"Size,Chest,Length\nS,20,27\nM,21,28\nL,22,29"}'
In PowerShell, write every " inside the --tool-arg value as \", or PowerShell strips the quotes:
npx @modelcontextprotocol/[email protected] --cli https://mcp.sizeref.online/mcp --transport http --method tools/call --tool-name audit_size_chart --tool-arg 'table={\"csv\":\"Size,Chest,Length\nS,20,27\nM,21,28\nL,22,29\"}'
The tool's answer, as the Inspector shows it inside the call result:
{
"verdict": "needs_fix",
"results": [{
"index": 0,
"caption": "",
"verdict": "needs_fix",
"problems": [],
"questions": [
{ "key": "kind", "allowed": ["body", "garment"] },
{ "key": "unit", "allowed": ["in", "cm"] },
{ "key": "category", "allowed": ["Tops", "Bottoms", "Leggings", "Outerwear", "Dresses", "Other"] },
{ "key": "children", "allowed": [true, false] }
],
"ignored_columns": []
}],
"note": "SizeRef stored nothing from this request."
}A pasted table is at best needs_fix: the server cannot see the product page, so it asks what the table leaves unsaid. Pass the answers to normalise_size_chart next. The Tools page explains each question.
To read the schema resource, use --method resources/read --uri sizeref://schema/chart-v1 in place of tools/list.
Or use the web view
npx @modelcontextprotocol/[email protected] --server-url https://mcp.sizeref.online/mcp --transport http
- Open the printed address.The command prints a local address with a per-launch token and opens it in your browser. Use that address, not one typed from memory.
- Connect.The server is listed with the transport Streamable HTTP. Connect to it. There is no sign-in step.
- List the tools.Open the Tools tab. It should show the three tools.
- Call one.Select
audit_size_chart, fill in the table with the fictional chart above, and call it. The answer appears below the form. The Resources tab showssizeref://schema/chart-v1.
Other clients.
The address is enough.
Any MCP client that can add a remote server over Streamable HTTP, with no sign-in, should connect the same way. Give it these settings and nothing more:
- URL
- https://mcp.sizeref.online/mcp
- Transport
- Streamable HTTP (some clients call it "http")
- Authentication
- None. No key, no headers, no sign-in.
SizeRef documents three clients: Claude (custom connector, tested 15 November 2026), Cursor and MCP Inspector. These pages do not cover other clients. If one does not work, tell us which client and what it showed.
The server is also listed in the official MCP Registry as online.sizeref/size-charts, with the same address. Clients that read the registry can find it there. You can see the listing in the registry's API.
ChatGPT.
Not in this pilot.
The current pilot documentation does not offer ChatGPT setup. Use Claude, Cursor or MCP Inspector for now. The Changelog records changes to the server and these pages.
A refused call
says why.
The server refuses oversized or malformed requests before any tool runs. A refusal never repeats your chart back. A chart that is merely wrong is not a refusal: it comes back as a normal answer with a verdict and problems.
| WHAT YOU SEE | WHY | WHAT TO DO |
|---|---|---|
HTTP 403Invalid Origin: example.com | The request came from a web page on another website. Browsers add an Origin header, and the server refuses browser calls from other sites. | Call the server from an MCP client, or from your own server code, which sends no Origin header. |
HTTP 403Invalid Host … | The request reached the server under another host name, for example through a proxy. | Use the address https://mcp.sizeref.online/mcp as it is. |
HTTP 429Too many requests from this address just now. Wait a minute, then call again. | More than 120 requests a minute from one internet address (an IPv6 address counts by its /64 network). The reply carries the header retry-after: 60. | Wait 60 seconds, then call again. In scripts, read retry-after. The Inspector's CLI docs say it exits with code 11 on a 429 and reports the retry-after value. |
A tool answer with RATE_LIMITEDToo many requests just now. | More than 600 calls a minute to that tool, for all users together. | Wait a minute, then call again. |
HTTP 413Send at most 262144 bytes in one request. | The request is larger than 262,144 bytes. | Send the size table, not the whole product page. Send one chart per call. |
HTTP 400Send one JSON-RPC message per request; batches are not supported. | The request held several calls in one JSON array (a JSON-RPC batch). | Send one call per request. MCP clients normally do this already. |
| An input validation error | A field does not match the tool's inputs. This refusal comes without the "stored nothing" note. | Check the tool's input schema in your client, or on the Tools page. |
An input validation error naming a fieldUnrecognized key: "shopper" | The call has a field the tool does not take. This includes a field named for a person (body, measurements, person, user or shopper): the server refuses those. | Send a size chart (html, csv, or headers and rows), never a person's measurements. Check the tool's inputs on the Tools page. |
Too large inside an answer: TOO_LARGE | The chart is over a limit, such as more than 60 sizes or 40 columns. | Split the chart, or send fewer columns. The Tools page lists every limit. |
| A web page instead of tools | The client points at https://mcp.sizeref.online/ without /mcp. | Add /mcp to the end of the address. |
HTTP 404 on /.well-known/… | Clients look there for sign-in details. The server has none, so it answers 404. | Nothing. This is expected; choose no sign-in in your client. |
The rate counts are kept separately at each Cloudflare location and are approximate. Heavy use, by you or by others, can mean a call is refused. Cloudflare's rate limiter uses your internet address to keep the count; SizeRef never logs or stores it. The terms set out the limits, and the privacy policy says what is logged.
The connector is added, but Claude does not use the tools
Check the connector is switched on for this chat: click +, select Connectors, and switch SizeRef Size Charts on. Then ask for a tool by name, for example "Use audit_size_chart on this table."
Cursor does not list the server
Check the file is named mcp.json, sits in .cursor/ in the project or in ~/.cursor/, and is valid JSON. Then check the server's toggle is on.
The Inspector call fails in PowerShell
PowerShell strips the double quotes inside the --tool-arg value. Write each one as \", as in the PowerShell command above.
Stop any time.
Nothing to delete.
The server has no accounts and keeps none of the charts or other content you send, so there is nothing to close or delete on SizeRef's side. Remove it from your client:
- Claude: go to Customize → Connectors, click Remove or the three dots next to SizeRef Size Charts, and follow the prompts. On a Team or Enterprise plan, an Owner or Primary Owner can remove it under Organization settings → Connectors. To turn it off for one chat, click +, select Connectors, and switch it off.
- Cursor: delete the
sizeref-size-chartsentry frommcp.json, or switch the server off with its toggle. - MCP Inspector: a server given with
--server-urlor on the command line is held in memory for that run, so there is nothing to remove. If you added it to the Inspector's server list, remove it there.
Stuck?
Send the chart.
Questions, problems or a chart that does not work: email fitlens2@gmail.com. Say which client you use and what it showed. Send the size chart, never a customer's data.