Skip to content
TRY THE PILOT
PILOT v0.1.0

Common questions.
Short, plain answers.

What SizeRef Size Charts does, what it keeps, and where it can be used. For the full legal text, read the pilot terms and the privacy policy.

US & IndiaNo sign-inStores no charts
01 / Getting started

Connect it.
Send a chart.

Who is it for?

Brands and retailers, and the developers and agencies who run their stores. It works on a store’s size chart inside an app that supports MCP, such as Claude or Cursor.

Do I need an account or a sign-in?

No. There is no account and no sign-in. You add one address to your MCP app: https://mcp.sizeref.online/mcp. It speaks Streamable HTTP. Because there are no accounts, there is nothing to close or delete when you stop.

Which apps can I connect it to?

The current documentation covers three: a Claude custom connector (tested working on 15 November 2026), Cursor, and MCP Inspector for developers. Other apps that can add a remote Streamable HTTP server with no sign-in may work the same way, but they are not documented. Step-by-step setup is on the Set up page.

The server is also listed in the official MCP Registry as online.sizeref/size-charts.

Does it work with ChatGPT?

Not in this pilot. The current pilot documentation does not offer ChatGPT setup, and SizeRef has not tested ChatGPT with this server. Use Claude, Cursor or MCP Inspector for now; see Set up.

What can I send?

A size chart in one of four forms: an HTML table, a CSV, headers and rows, or a chart already in SizeRef chart format v1. Send the chart itself. The format is described on the Chart format page.

Do I need a Shopify store?

No. Any store whose chart is an HTML table, a CSV or rows you can type out can use it. The JSON-LD export is a block a brand can add to its own product pages, however the store is built.

02 / Data and privacy

Size charts in.
Nothing kept.

This server takes size charts, never a person’s measurements, and keeps none of the charts you send. The answers below follow the terms and the privacy policy. Read those for the full text.

What happens to the chart I send?

Nothing is kept. The server has no database and keeps no copy of a request or its result. The charts you send remain yours. Each answer from a tool carries the note “SizeRef stored nothing from this request.” A call refused before the tool runs, such as one over 262,144 bytes or one whose fields do not match the tool’s inputs, gets a short refusal without it.

What is logged?

For each tool call, SizeRef’s own log holds the tool name, a result code and the time taken. Cloudflare adds to each log line the request’s method and web address, request IDs and a timestamp. The log holds no IP address, no request headers, and none of the chart or other content you send or receive. SizeRef logs nothing for other requests.

Cloudflare, which hosts the server, processes basic technical data, such as IP addresses, to deliver the service and protect it. Cloudflare’s rate limiter uses your internet address just to count requests each minute. SizeRef never logs or stores it.

Can I send a customer’s measurements?

No. Do not send any person’s measurements or personal data. The server refuses a call whose own fields include one named for a person, such as measurements or shopper. It does not look inside a chart for such fields, and it cannot tell what a chart holds, so do not send a person’s measurements.

Is it part of the SizeRef app?

No. It is a separate service. The SizeRef app, which measures a body with the phone camera, keeps its measurements on the phone and never sends anything to this server.

03 / What it does and doesn’t do

It states facts.
It doesn’t guess.

Does it use AI?

No. Every check is a fixed rule. The server calls no AI model and makes no outbound requests. The app you connect it to may use AI to talk with you, but the server itself does not.

Can it read my product page link, an image or a PDF?

No. It does not open web pages, and it does not read images or PDFs. It works on the chart you send, so it cannot see a product page, its pictures or its existing markup. If your chart is a picture, type it out as a table.

The export tool takes an optional product URL, but it does not open it. It uses the URL to build each size’s @id in the JSON-LD, for example …/products/tee#size-M.

What happens when my chart leaves something out?

It asks. When a table does not say a fact, such as inches or centimeters, or body or garment measurements, the tools return questions with the allowed answers. Nothing is inferred from the numbers. You pass your answers to normalise_size_chart on the next call. For a pasted table, the category and whether it is a children’s chart are always asked.

Here is a fictional three-size tee sent to audit_size_chart:

Input · fictional tee
{
  "table": {
    "caption": "Fictional sample tee",
    "headers": ["Size", "Chest", "Length"],
    "rows": [["S", "20", "27"], ["M", "21", "28"], ["L", "22", "29"]]
  }
}
Output from the live server, v0.1.0, 17 Nov 2026
{
  "verdict": "needs_fix",
  "results": [{
    "index": 0,
    "caption": "Fictional sample tee",
    "verdict": "needs_fix",
    "problems": [],
    "questions": [
      { "key": "kind", "allowed": ["body", "garment"] },
      { "key": "unit", "allowed": ["in", "cm"] },
      { "key": "category", "allowed": ["Tops", "Bottoms", "Leggings", "Outerwear", "Dresses", "Other"] },
      { "key": "children", "allowed": [true, false] }
    ],
    "ignored_columns": []
  }],
  "note": "SizeRef stored nothing from this request."
}

The full answer, with spacing added for reading. Answering kind: garment can bring new questions on the next call: whether it was measured flat, the fit and the stretch. Every question and its allowed answers are on the Tools page.

Does it remember my chart between calls?

No. Each request starts fresh, and nothing carries over. Send the table again with your answers.

Does it check that clothes fit, or pick a size for a shopper?

No. It states what the chart says, in one clear format. It never takes a person’s measurements and never gives a size for a person. It can flag a value outside the usual range, or a measurement that falls from one size to the next, but it does not judge fit.

Look over every result before you rely on it. The terms say a chart it checks, tidies or exports can be wrong or incomplete.

Can it publish to my Shopify store?

No. It does not publish to a store, sync a catalog or install anything. It gives you the export, and you or your developer put it in your product pages. The Walkthrough shows one way to do that on Shopify.

How does it relate to the Shopify plugin?

They share SizeRef chart format v1 and the same table reader. The chart this server exports in SizeRef JSON is in the format the plugin sizes shoppers from. They are separate services. The plugin, Find my size, is in testing on SizeRef's own development store and is not yet in the Shopify App Store. Read more on the Shopify plugin page.

Will the export get my products shown by AI assistants?

We can’t promise that. The export contains a schema.org JSON-LD block for your product page, SizeRef JSON, CSV and plain text. Whether any AI assistant or search engine reads those measurements has not been tested, and we make no promise about traffic, search ranking or returns.

Are there charts it can’t handle?

Yes, a few:

  • Bra band-and-cup charts are not supported.
  • Columns are recognized by header words: chest, waist, hips, inseam, sleeve, shoulders and length, plus a few common variants. Others, such as Color or Thigh, are listed as ignored and left out.
  • A chart needs chest, waist or hips for every size. Length, sleeve, inseam and shoulders are carried and exported, but not used to size. The JSON-LD leaves out any measurement schema.org has no type for, such as shoulders, and the export’s omitted list says which and why.
  • Each cell must be a number or a range, such as 38, 38½ or 38-40. Anything else is reported, never silently dropped.
04 / Pilot and pricing

Free during the pilot.
US and India.

Is it free?

Yes. The server is free to use during the pilot. We may change or end the pilot, and the server, at any time. See Free during the pilot in the terms.

Where can it be used?

It is for use in the US and India, and not in the EU, EEA or UK.

What are the limits?

One call per request: a request that holds several calls (a JSON-RPC batch) is refused. A request can be up to 262,144 bytes. A chart can have up to 60 sizes and a table up to 40 columns. A refused call says why.

The server also answers a limited number of requests from one internet address each minute, and a limited number of calls to each tool each minute for all users together. Today those are 120 requests a minute from one address and 600 calls a minute to each tool. The counts are kept separately at each Cloudflare location and are approximate, and limits may change. If you see “Too many requests”, wait a minute, then call again. The full list is on the Tools page.

Who runs it, and is there a warranty?

SizeRef makes and runs it, and Cloudflare hosts it. It is version 0.1.0, provided as is, with no warranty and no promise that it will be available or free of errors. We may limit, suspend or end access at any time. Changes are listed in the Changelog.

How do I report a problem?

Email fitlens2@gmail.com with the chart (never a customer’s data) and what you expected. You can also visit SizeRef support.